The Vaporly e-cigarette consists of 2 parts, a battery and a Cartomizer. The cartomizers are supplied separately in packs of 5 and are available in various flavors and nicotine contents.
CONNECTING THE E-CIGARETTE WITH THE BATTERY AND CARTOMIZER:
Take a cartomizer out of its packaging and screw the battery on. This should be easy when you align the threads.
SMOKING THE E-CIGARETTE:
Inhale as you normally would when smoking a cigarette, allow a few seconds to pass between puffs. The LED light on the tip of the battery turns on as soon as you inhale.
REPLACEMENT OF THE CARTOMIZER
You know it's time to replace a cartomizer when you notice a significant reduction in vapor volume when smoking. To replace the cartomizer, simply unscrew the used cartomizer from the battery and replace it with a new one. Visit www.novusfumus.nl to view the full range of cartomizers.
Tip: To ensure the freshest smoking experience, keep the cartomizer in the packaging until use.
CHARGING THE BATTERY
There are 2 ways to know that it is time to charge the battery of your e-cigarette. 1) When there is a noticeable reduction in vapor volume and 2) When the LED on the tip of the battery flashes three times. Note: if you use a fully charged battery, reducing the vapor volume may also indicate that the cartomizer needs to be replaced.
TO CHARGE YOUR BATTERY:
»Unscrew the cartomizer from the battery of the e-cigarette.
»Screw the battery of the e-cigarette to the USB charger.
»Plug the USB charger into a USB port on your computer or the USB adapter for your home.
»When plugged in, the charger light will turn red, indicating that the battery is charging.
»It takes 3-5 hours to fully charge the battery. When the battery is charged, the light will change from red to green.
THE CARTOMIZER - NO LEAKS AND EASY TO USE
The cartomizer produces a thick smoke-like vapor and has been redesigned to make inhalation even easier. Each cartomizer produces a vapor volume comparable to the smoke volume up to 1.5 pack of regular cigarettes - about 360 puffs. All cartomizers are triple sealed. This ensures that you get the freshest cartomizer possible.
When it is time to replace the cartomizer, just unscrew the used cartomizer and screw on a new one. This simple two-step cartomizer replacement adds to the ease of use and pleasure of vaping electronic cigarettes
The cartomizer contains 4 main ingredients: propylene glycol, vegetable glycerine, artificial flavors and nicotine. There are many new flavors in the development. Check our website www.novusfumus.nl for the most recent updates.
NICOTINE LEVELS
The following nicotine levels are available (by volume): Nicotine Free (0%) *, Ultra Light (0.6%), Light (1.2%), Medium (1.4%), Full (1.8%), Strong (2.0%)
TROUBLESHOOTING
|
The light on the battery flashes when you inhale. |
The battery is almost empty. Unscrew the cartomizer and screw the battery into your USB charger to charge. |
|
The e-cigarette produces little to no vapor. |
Take a few strong, short puffs to warm up the atomizer. If that doesn't help, your cartomizer should be replaced. |
|
The cigarette produces a burnt odor. |
This is normal and only means that the fluid in the cartomizer has been used up; you need to replace your cartomizer. |
|
The aroma tastes burnt. |
This is normal and only means that the fluid in the cartomizer has been used up; you need to replace your cartomizer. |
»Store batteries and cartomizers in a cool, dry place away from direct sunlight.
»Keep batteries away from high temperatures for storage and charging.
»Protect the electronic cigarette from falling.
»Do not use with accessories not manufactured by Vaporly, Magic Mist or Easypuff
»Do not expose the electronic cigarette to water or moisture.
»Do not charge or use the e-cigarette outside the temperature range of 4 ° C - 40 ° C.
»Do not open the cartomizer.
»Avoid direct contact of the cartomizer fluid with the skin.
»Please comply with local smoking laws.
0 Comments